NEU: Durchflussoptimierte Typen erhältlich
Siliziumkarbid-Filter sind für den Einsatz beim Vergießen von Eisen- und Kupferlegierungen geeignet. SQ Siliziumkarbid-Schaumkeramikfilter werden bevorzugt für den Guss von Eisenwerkstoffen eingesetzt, können aber auch für andere Gussprozesse – ausgenommen für Stahlguss – eingesetzt werden.
Vorteile unserer SQ-Filter:
- Verbesserung der mechanischen und dynamischen Eigenschaften der Gusswerkstoffe
- Höhere Prozesssicherheit ◊ Strömungsberuhigung durch laminare Formfüllung
- Verringerung ungewollter Oxidationsprozesse sowie Bildung von Gasblasen ◊ Reduzierung des Nachbehandlungsaufwands durch saubere Gussoberflächen
- Reduzierung des Kreislaufanteils durch vereinfachte Gießsysteme
- Verringerung von Ausschuss
Neu ist, dass für die verschiedenen Größen durchflussoptimierte Varianten erhältlich sind. Zu näheren Infos oder Fragen, sprechen Sie uns bitte direkt an.
ZG Einguss-Systeme
ZG – EINGUSS-SYSTEME AUF ZELLULOSE-KOMPOSIT-BASIS
Die Anforderungen an Gießereien im Bereich des Handformgusses mit komplexen Geometrien von mittleren bis größeren Guss-Stücken sind ständig gestiegen und erfordern Optimierungen der Kostenstrukturen. Einguss-Systeme sind auch mit Unterstützung von Simulationsprogrammen fester Bestandteil der Gießformen. Im Vergleich zu konventionellen keramischen Systemen, bietet die neue ZG-Produktreihe eine Reihe signifikanter Vorteile für die Gießereien:
- Leichter Aufbau der Einguss-Systeme durch einfache Steckverbindungen
- Kein Verkleben der einzelnen Elemente zwingend erforderlich
- Schnelles Anpassen der Größen einzelner Komponenten, kaum Staubbelastung, kein Nassschneiden zur Einkürzung notwendig, kein Kühlwasser erforderlich
- Geringeres Bruchrisiko
- Kaum Kontamination des Formsandes nach Entformen, kein Aussieben von keramischen Partikeln vor der Wiederverwendung des Formsandes
- Leichteres Gewicht des Einguss-Systems, dadurch geringerer Aufwand für das Abstützen längerer Verbindungen
ZG-Einguss-Systeme bestehen aus einem Kompositmaterial, das auf Zellulose basiert und werden hauptsächlich in den Anwendungen Lost-Foam-Guss und traditionellem Sandformguss verwendet.
Die Produktpalette umfasst gerade Rohrstücke ebenso wie 90°-Winkel und T-Stücke. Die maximale Gebrauchstemperatur beträgt 1.400 °C bei einer Gießzeit von 60 Sekunden und einer maximalen Gussmenge von 5.000 kg.
NEW: Flow-optimised models available
Silicon carbide filters are used when casting iron alloys and copper alloys. SQ silicon carbide ceramic foam filters are suitable for use in casting ferrous materials, but can also be used for other casting processes – except for casting steel.
Advantages of our SQ filters:
- Improve the mechanical and dynamic properties of casting materials
- Higher process reliability ◊ Laminar mould filling for a smooth flow
- Reduce unwanted oxidation processes and formation of gas bubbles ◊ Clean casting surfaces reduce post-treatment work
- Simplified casting systems reduce material volumes in the circular flow
- Reduce scrap
Flow-optimised variants are now available for various sizes of filter. Please contact us directly for further information or if you have any questions.
ZG gating systems
ZG GATING SYSTEMS BASED ON CELLULOSE COMPOSITES
The demands made on foundries have steadily increased over the years, especially in the field of hand mould casting for medium to larger castings with complex geometries. The cost structures of this process are in dire need of an overhaul. Gating systems are integral parts of the moulds and are designed with the help of simulation software. Compared to conventional ceramic systems, the new ZG product range offers a number of significant advantages for foundries:
- Easy assembly of the gating systems with simple push-fit connections
- No need to glue the individual elements together
- Size of individual components can be quickly adjusted, hardly any dust exposure, wet cutting not necessary for shortening elements, no cooling water required
- Reduced risk of breakage
- Minimal contamination of the moulding sand after demoulding, no need to sieve out ceramic particles before reusing the moulding sand
- Lighter gating system makes it easier to support longer connections
ZG gating systems are made from a composite material based on cellulose and are mainly used in lost foam casting and traditional sand mould casting applications.
The product range includes straight pipe sections as well as 90° elbows and T pieces. The maximum service temperature is 1400°C with a pouring time of 60 seconds and a maximum casting weight of 5000 kg.
15th GIFA international foundry trade fair in Düsseldorf, Germany – 12-16/06/2023
Visit us at GIFA 2023, hall 12, booth E21
We will be presenting a selection of our products at GIFA. Come and talk to us about our product range. Why not drop by our coffee bar. GIFA showcases the global range of products and services available for foundries and smelting plants, refractory technology, plants and machinery for producing moulds and cores, moulding materials and moulding shop supplies, pattern and mould making, control technology and automation, environmental protection, waste disposal and information technologies. The trade fair is accompanied by a diverse schedule of events including numerous seminars, international congresses, symposia and lectures.
We look forward to meeting you.